Replace your master IDE hard drive (C:) without reinstalling windows. ... How-to: Install a New Master Hard Drive

Single Click Hard Drive Imaging! ... Replace the cover. You might want to ... Do this for either the Primary master and slave and possibly the Secondary master and slave as the installation requires.

You only need to worry about jumpers if you are using an IDE hard drive. IDE hard drives have settings for master, slave and cable ... I needed to replace the one that crashed a couple of weeks ago,

When connecting more than one hard drive or other IDE device to a computer on the same IDE controller, you have to assign one as the primary or master and one as the secondary or slave using jumpers.

Once you have the hard drive out, ... In theory, you can replace the 2.5" HD with a large capacity 3.5" driver by using a 2.5 to 3.5 convert cable and mount the drive outside of the AppleTV box.

Technology, science, news and social issues for geeks. ... The article covered a couple of solutions to help you in the case where your hard drive would stop working.

Replacing your master (IDE) hard drive. ... How to Replace Your Master (IDE) Hard Drive ; Step No 1; Make sure you read and keep all information which came with your new drive.

When you replace or upgrade any hard drive, you want to make sure that the jumper settings for Master/Slave selection on older drives are set correctly.

You may wish to make sure the hard drive is correctly installed before replacing the covers, but it is advisable to replace the covers before reconnecting the mains.

You can try to set the hard drive as Master, that might help. Make sure that there is no other device attached to the same cable (like another hard drive or a CD/DVD drive).